| 翻訳と辞書 |
| Communications and networking riser ： ウィキペディア英語版 |
Communications and networking riser
Communications and networking riser (CNR) is a slot found on certain PC motherboards and used for specialized networking, audio, and telephony equipment. A motherboard manufacturer can choose to provide audio, networking, or modem functionality in any combination on a CNR card. CNR slots were once commonly found on Pentium 4-class motherboards, but have since been phased out in favor of on-board or embedded components.
== Technology ==
Physically, a CNR slot has two rows of 30 pins, with two possible pin configurations: Type A and Type B, each with different pin assignments. CNR Type A uses 8-pin PHY interface, while Type B uses 17-pin media-independent interface (''MII'') bus LAN interface. Both types carry USB and AC'97 signals.
As with AMR, CNR had the cost savings potential for manufacturers by removing analog I/O components from the motherboard. This allowed the manufacturer to only certify with the US Federal Communications Commission (FCC) for the CNR card, and not the entire motherboard. This resulted in a quicker production-to-market time for new motherboards, and allowed mass-production of CNR cards to be used on multiple motherboards.
The ACR slot was a competing specification developed by a group of third-party vendors. Its principal advantage over CNR was the backwards-compatible slot layout which allowed it to use both AMR and ACR cards. The same group also developed a physically smaller version, the MDC.
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Communications and networking riser」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|